FRP Grating

Webforge FRP Brochure.pdf (4.04MB) 
 

The square pattern design with interwoven construction allows load to be transferred to the adjoining bars providing a superior load-carrying capacity.

The high resin-to-glass ratio provides maximum corrosion resistance to a wide range of chemicals frequently encountered in many industries.

Webforge FRP comes in one standard panel size 1220 x 3660 mm.

Features/Benefits

1. Integral, one-piece construction increases load-bearing capabilities.
2. Load applied to a Webforge FRP bar is transferred to adjoining bearing bars, assisting in load distribution on the grating as well as on the support structure.
3. Smooth resin-rich vertical surfaces and tapered bars allow all debris to fall through.
4. Continuous glass fibre strand in alternating layers throughly wetted with the appropriate resin for excellent corrosion resistance.
   
5. Open area 70%.Material

MaterialISOPTHALIC POLYESTER RESIN
ASTM E-84 Fire rating Class 1, 25 or less

VINYL ESTER RESIN
ASTM E-84 Fire rating Class 1, 25 or less

PHENOLIC RESIN
ASTM E-84 Fire spread index 4. Smoke developed value 1.
Meets: Class 1 Flammability per ASTM E-84.
Class A interior wall & ceiling finish per NFPA No. 255.
Available only in 38mm deep.

Top Surface

Safety
The slip resistance of the flooring and walkway product needs to be considered. Standard grating comparies plain square edge flat bars.
To increase slip resistance the following points should be considered on sloping walkways.

Normally provided with an anti-skid surface. This is a coarse grit embedded into the resin. Plain top surface is available.

Treatment/Colour

Available in a variety of colours.

We recommend:
Isopthalic Polyester Resin - Green
Vinyl Ester Resin - Yellow
Phenolic Resin - Reddish Brown

Panel Size

Available in a variety of sizes suitable for cutting to suit the application.

1. G pattern.
2. Choose a load bar from the Load/Deflection Table.
3. Add the options for Material, Top Surface and Colour.
4. Panel size suffix should be stated only if you want a stock panel.
5. Other options are available. Contact your nearest branch.

Panels will have fingers unless the required sizes fall on a bar width.

Ordering Examples: