Aluminium

handrailing toleranceSTANCHIONS 6063-T6 ALUMINIUM

50mm OD
42mm ID
BALLSIZE: 76mm OD


RAIL SPECIFICATIONS 6063-T6 ALUMINIUM

  • Handrail - 46mm OD / 39mm ID
  • Kneerail - 38.1mm OD / 34.1mm ID
NOTE: Standard Stanchions are drilled to suit the rail specification above.


Surface Treatment

  • Mill Finished or...
  • Anodised
  • Painted
  • Powder Coated

Stanchion Spacing

Webforge aluminium stanchions, with the exception of side offset types, should be spaced at no greater than 2000mm centres for rails 900mm in height and no greater than 1800mm centres for rails 1000mm in height.

Type
 Weight Tolerances
PC, C, CA, SA, SC
 2.10kg
Pipe Sizes:
The tolerances for pipes will depend on the pipe specification that is used.
  1. Variations in cross section
    Specified OD up to 50mm ± 0.2mm
    Over 50mm OD to 75mm ± 0.25mm
  2. Variations in thickness ± 10%

Base Plates:
All dimensions ± 1mm
Thickness ± 0.2mm

Sphere Drilling:
Drilled diameters 2 to 4mm oversize
Hole Angle ± 1° in any direction (any 2 axis) All stanchions except AM ± 0.5° in the slope direction only.

P, PA
 2.05kg
W, WA, AMW
 1.66kg
S 2.16kg
SO
 2.52kg
SOAL, SOAR, SOA
 2.29kg
AM
 1.92kg
L
 0.69kg
M
 0.86kg
K
 0.69kg
IG, IGA
 2.64kg