Balustrading

The Webforge Balustrade is a sturdy handrailing system ideally suited for both internal and external applications.

The design is aimed at preventing children from climbing over or through the panel.

The Webforge Balustrade provides safe access conditions on stairways, ramps, landings, access bridges and general barrier fences.

The balustrade is manufactured in the following standard panels to comply with the relevant Australian standard or to customers specifications.

Component	Austrailian Standard	Stanchion Spacing
Standard Steel	AS1657	2 m
Standard Steel	AS1170	1.8 m
Standard Jumbo Steel	AS1170	3 m

Balustrading is available in Steel or Jumbo panels.

Standard Steel Balustrading consists of top and bottom rails manufactured from 32NB x 3.2mm pipe with vertical bars manufactured from 12mm mild steel round at 100mm centres. Stanchions are manufactured from 40NB x3.2mm pipe with 76mm diameter spheres.

Standard Jumbo Steel consists of top and bottom rails manufactured from 65NB x 3.6mm pipe with vertical bars manufactured from 16mm mild steel round at 100mm centres. Stanchions are manufactured from 65NB x 3.6mm pipe with 125mm diameter spheres.

BAL-SP

Your choice of infill
Your choice of stanchion type
Jumbo stanchions

BAL-1

Standard: 12mm diameter rods

Jumbo: 16mm diameter rods

BAL-1D

As BAL-, with the addition of extra railing to comply with requirements of AS1428.1 for disability access.
Additional rail may be applied to other balustrade types by suffix "D"