Steel Handrail Systems

Stanchions (Grade 250 Steel)

BALLSIZE: 76mm OD

Base Plates

• All base plates other than AM Type
  Specification - 75mm x 145mm x 10mm
  Holes - 17.5mm dia. at 102mm centres
  NOTE: Non-standard base plates manufactured to order.
• Type AM
  Specification - 65mm x 170mm x 10mm
  Holes - 17.5mm dia. at 125mm centres
  NOTE: Non-standard base plates manufactured to order.

Kick Mounting Brackets

Specification - 50mm x 45mm x 5mm Long Angle
Holes - 14mm slots at 45mm centres to suit 100mm kickplate

NOTE: Non-standard kickplate mounting brackets manufactured to order.

Rail Specifications

• STANDARD
  Handrail - 32mm NB (42.4mm OD) Med. Gauge
  Kneerail - 25mm NB (33.7mm OD) Med. Gauge
  NOTE: Standard Stanchions are drilled to suit the rail specification above.
• SPECIAL Orders can be drilled as follows:
  Handrail: From 25mm NB (33.7mm OD) to 40mm Nominal Bore (48.3mm OD)
  Kneerail: From 20mm NB (26.9mm OD) to 40mm Nominal Bore (48.3mm OD)

Surface Treatment

• Hot dip galvanised (AS 4680-1989) - excluding taper pins...
  or
• Untreated
• Painted
• Powder Coated

Webforge Tubular Handrail System is manufactured to comply with Australian Standard AS 1657/1985. Para 3.4 of this standard recommends a maximum spacing of stanchions of 2 metres for our Standard Range.

Weights