Ordering

Material

  • Mild Steel
  • Stainless Steel
  • Aluminium

Treatment

    Steel   Stainless Steel
 Aluminium
  Untreated Black
   
  Galvanised    
   Electropolished    
  Powder Coated 
  Painted 
   Mill  
  Anodised     

 

How to Order Stanchions

  1. Choose a stanchion type.
  2. Choose a material type.
  3. Choose a treatment
  4. Nominate a kickplate bracket height
  5. Nominate an offset if SO type stanchion
  6. Nominate an angle if an angle type stanchion
  7. Nominate the required options
  8. Enclose a sketch if needed to explain specials

Examples

PG Platform Galvanised
WB Welded Black
PA Platform Aluminium 
SOG110 SO Galnvanised 110 offset
SOGK 110 R140 SO Galvanised 110 offset RH Kickplate D=140 
 SOGK 125 L160 SO Galvanised 125 offset LH Kickplate D=160 
SOHG 110
SO Heavy Duty Galvanised 110 offset 
AMB45 AM Black 45°
SG Special
S Galvanised Drill 32/32
CG Special
C Galvanised. Centres 450/450/550. Drill 32/25/25. See Sketch Supplied
   

 

How to order Closure and Bends

  1. Choose a closure and bend type.
  2. Choose a material
  3. Choose a treatment
  4. Choose a leg length if not standard
  5. Choose a pipe size
  6. Choose n angnle if an ACB or RB

Examples

ACB 32 G 45
Angle Closure 32NB Galvanised 45°
ACB 25 G 45 Angle Closure 23NB Galvanised 45°
HCB 32 B
Horizontal Closure 32NB Black
 HCB 25 B
Horizontal Closure 25NB Black
RB 25 G 90
Rail Bend 25NB Galvanised 90°
RB 32H B135 Rail Bend 32NB Heavy Duty Black 135°

 

How to Order Gates/Drop Barriers 

  1. Choose a gate/drop barrier type
  2. Choose the stanchion type
  3. Choose the material
  4. Choose a treatment
  5. Nominate a kickplate if required
  6. Nominate th eswing direction
  7. Nominate the centre to centre dimensions or advise if other.

Examples:

Gate with two PG stanchions. Galvanised No Kickplate 1250 centres. NW swing
 Gate without stanchions. Galvanised. With Kickplate. 1000 centre to centre of 32NB pipe. SW swing
 Drop bar. Painted yellow. 700 inside styles