®
Product Codes
| PATTERN | STEEL | ALUMINIUM | FIBREGLASS | |||
| CROSS ROD PITCH |
LOAD BAR PITCH | CROSS ROD PITCH | LOAD BAR PITCH |
CROSS ROD PITCH | LOAD BAR PITCH |
|
| A | 100 | 30 | 100 |
30 | ||
| B |
50 | 30 | 50 | 30 | ||
| C | 100 | 40 | ||||
| D | 50 | 40 | ||||
| F | 50 | 60 | 50 | 60 | ||
| G (FRP ONLY) | 38 | 38 | ||||
Load Bar Size
| 3mm |
4.5mm | 5mm |
6mm |
| 20x3 | 20x5 | ||
| 25x3 | 25x4.5 | 25x5 | |
| 32x3 | 32x4.5 | 32x5 | |
| 38x4.5 | 38x5 | ||
| 40x3 | 40x5 | ||
| 45x5 | |||
| 50x5 | |||
| 55x5 | |||
| 65x5 | |||
| 75x5 | 75x6 |
Note: Not all sizes are available in all locations, not all sizes are available ex stock. Please checx with your local Sales Office for details.
Material
| A | Aluminium |
| M | Mild Steel |
| S | Stainless Steel - Grade 316 |
| S1 | Stainless Steel - Grade 304 |
| V | Fibreglass - Vinylester |
| I |
Fibreglass - Isopthalic |
Top Treatment
Standard steel sections. These form the main structure fo the grating and are held together with cross rods
Serrated grating is available with most stardard load bearing bars (aluminium and steel only). The serrations are formed by placing a series of notches along the upper edge of the load bar, thus enhancing the non-slip characteristics of the grating. Use should be made of the serrated conversion factors, shown on the Load Tables, when determining load bearing and spanning capacity.
Grit top is available in FRP grating only.
Treatment (Finish)
| G |
Galvanised (Steel Only) |
| B | Bitumen Coated (Steel Only) |
| E |
Electro Polished (Stainless Steel Only) |
| P | Painted |
| GB | Garnet Blasted (Stainless Steel Only) |
| A | Anodised (Aluminium Only) |
| PC | Powder Coated |
| U | Untreated |
| M |
Mill Finish (Aluminium and Stainless Steel Only) |
| GR | Green (FRP only) |
| Y |
Yellow (FRP only) |