Region: AU  CN Asia

Fixing Clips

Fixing Clips

Fixing Clips

Webforge offers a complete range of fixing clips and accessories to suit a variety of grating and mesh profiles depending on the application and installation requirements.

Fixing clips

Clip Assemblies

The Webforge Clip (C100MG) is a galvanised clip, consisting of;
  • a pre-assembled "clip top"
  • M8 bolt & nut, and
  • bottom bracket
The clip set captures the nut, allowing fixing from the top of the grating, enabling a rapid and secure connection of grating to steel support sections.
Fixing Clips

 Product Code
Screw Size
To suit flange thickness (mm)
Webforge Grating type
Grating Bar depth* D (mm)
 C001MG M8x65 5 - 16
A,B,C,D,E,F Min 20   Max 50

* longer screws available for greater bar depth. Max bar depth = 65mm

Top Clips

Top clips

Bottom Clips

bottom fixing clips

Screws & Rivets

screws

Clip Frequency

Nominal 4 per panel.

  • Approximately 3 per M2 where span is > 1500mm.
  • Approximately 5 per M2 where span is > 750mm or less

Fixing Clips are not generally recommended in areas of vibration or where lateral loads are applied to the grating.

Welding

Welding grating to the support structure is a suitable method of fixing, provided minimum requirement are met. The minimum number of welds is four per panel.

Grating:
Weld 5mm fillet 25mm long at 1000mm centres.
Expanded Mesh: Weld every fourth strand.

 

 



New Online Store for Webforge Products!

 

Australia Click Here                                       New Zealand Click Here

meshstore click here small     meshstore click here small


Contact Us
Contact Us
Contact Us
Request A Quote
Webforge Asia operates throughout the Asia Pacific region in locations such as  India, New ZealandSingapore, Philippines, Indonesia, Thailand, Vietnam, Malaysia, China, and Australia.