Fixing Clips
Webforge offers a complete range of fixing clips and accessories to suit a variety of grating profiles depending on the application and installation requirements.
Fixing Clips are not generally recommended in areas of vibration or where lateral or cantilever loads are applied to the grating.
Clip Assemblies
The Webforge Clip (C100MG) is a galvanised clip, consisting of: a pre-assembled "clip top", M8 bolt & nut, and bottom bracket
The clip set captures the nut, allowing fixing from the top of the grating, enabling a rapid and secure connection of grating to steel support sections.
Product Code
|
Screw Size
|
To suit flange thickness (mm)
|
Webforge Grating type
|
Grating Bar depth* D (mm)
|
C001MG |
M8x65 |
5 - 16
|
A,B,C,D,E,F |
Min 20 Max 50
|
* longer screws available for greater bar depth. Max bar depth = 65mm
Top Clips
Bottom Clips
Screws & Rivets
Welding
Welding grating to the support structure is a suitable method of fixing, provided minimum requirement are met. The minimum number of welds is four per panel.
Grating:
|
Weld 5mm fillet 25mm long at 1000mm centres. |
Expanded Mesh: |
Weld every fourth strand. |